HARDWARE & CARGO CONTROL
Click on the PART NUMBER to add parts to the “Your Saved Parts” to request a quote.
Disclaimer: Images may not always be accurate to the part #
If you do not find what you are looking for contact us.
Spare Tire Carriers
| PART NUMBER | DESCRIPTION |
|---|---|
| ST10K | Spare Tire Bracket, Fits 10k Jack On HD Construction Trailers |
| 8650 | Spare Tire Carrier, Fits 5, 6, 8 Bolt Wheels, Common On Livestock Trailers |
| 6220 | U-Bolt Style Spare Tire Carrier, Fits 4, 5, 6, 8 Bolt Wheels W/O Lock |
| ETC0101 | U-Bolt Style Spare Tire Carrier, Fits 4, 5, 6, 8 Bolt Wheels W/O Lock |
| RTX5401 | U-Bolt Style Spare Tire Carrier, Mount to Any Crossbar, Fits 4, 5, 6, 8 Bolt Wheels W/O Lock |
Flush Hinges
| PART NUMBER | DESCRIPTION | LENGTH | WIDTH |
|---|---|---|---|
| 104 | Chrome-Cast Flush Hinge, Incl. Stainless Pin | 6” | 3 ¼” |
| 80723 | Zinc-Plated Reverse Strap Hinge, 5 ¾” Offset, 6 ½” Door Hole Spacing, 3 3/8” Mtg. Hole Spacing, Fits Cargo Mate Trailers | 18” | 4 ½” |
Hinge Pins
| PART NUMBER | DESCRIPTION | OUTSIDE DIA. | LENGTH |
|---|---|---|---|
| HP12-412G | Hinge Pin/Nipple Assembly | ¾” | 4 ¾” |
| FSP200GF | Weld-Able, Grease-Able Hinge Pin | 5/8” | 8” |
| FBP100 | Weld-On Bullet-Style Door Hinge | 0.63″ | 4” |
| FBP150 | Weld-On Bullet-Style Door Hinge | 0.79″ | 6” |
Handles
| PART NUMBER | DESCRIPTION | SHAFT LENGTH |
|---|---|---|
| 276 | ‘L’ Handle With Lock | 2 ½” |
| 277 | ‘L’ Handle Without Lock | 2 ½” |
| 777 | Locking ‘T’ Handle | |
| 57RH | Locking Thumb Latch, RH, Fits Tractor Cabs & Horse Trailers | |
| 57LH | Locking Thumb Latch, LH, Fits Tractor Cabs & Horse Trailers | |
| L4080 | Flush Mount ‘T’ Handle Latch, 2 ¾” X 3 ¾” | N/A |
E-Track
PART NUMBER | DESCRIPTION |
|---|---|
| RT8020 | Galvanized E-Track, Horizontal Style, 10’ Length |
RT8042 | Cargo Control E-Track, Horizontal Style, 10’ Length |
E-Track Accessories
PART NUMBER | DESCRIPTION |
|---|---|
2350-12-SE | Cargo Control E-Track Ratchet Strap, 12’l X 2”W |
| KI1845 | Cargo Control E-Track Wood Beam Divider Stake Pocket |
RT9090 | Cargo Control Floor E-Track Accessory, Rope Tie-Off, 6”L X 2”W |
Weld-on Stake Pockets & Tie Loops
PART NUMBER | DESCRIPTION | GAUGE | HEIGHT | INSIDE DIMENSIONS |
|---|---|---|---|---|
B2373R | Weld-On Stake Pocket | 4 | 3” | 1 5/8” X 3 ½” |
| RNTL20012 | Weld-On Tie Loop | ½” | 2 ½” | N/A |
D-Rings & Lashing Rings
PART NUMBER | DESCRIPTION | CAPACITY |
|---|---|---|
B701SM | Surface-Mount D-Ring, 4 ½” Outside Dia., Plastic Trim, Zinc-Plated | 800lbs |
| RT9002 | Flush-Mount Tie Down, 4 ½”L X 4 7/8”W, 1 3/8” Inside Dia., Forged Ring, Recessed | 6000lbs |
RT8026 | D-Ring W/Bolt-On Mounting Bracket | 12,000lbs |
| RT9004 | Recessed D-Ring | 1200lbs |
DR14-15 | D-Ring W/Mounting Bracket, ¼” | N/R |
Hitch Pins
| PART NUMBER | DESCRIPTION |
|---|---|
| 90030 | Hitch Pin & Clip, ½” Dia., Fits 1 ¼” X 1 ¼” Receivers |
| 63242 | Hitch Pin & Clip, 5/8” Dia., Fits 2” Receivers |
| 63243 | Hitch Pin & Clip, 5/8” Dia., Fits 2 ½” Receivers, Packaged |
| HBQ-PIN | Pull Pin For Adjuster On Gooseneck Coupler |
| 346H | Hitch Pin, ¾” Dia., Fits Gooseneck Ball Coupler |
| 5764 | Pin & Clip For Clevis Hitch, 1” Dia. X 4 ¾” Length, Incl. Hairpin Clip |
Lockable Hitch Pins
PART NUMBER | DESCRIPTIONS |
|---|---|
| DB-3 | Combination Locking Receiver Hitch Pin, 5/8” Dia., Fits 2” Receivers |
MAG200 | Resettable Combination Locking Receiver Hitch, 5/8” Dia., Fits 2” Receivers |
| 1472DAT | Receiver Lock, ½” X 2 ½” |
TC123 | Adjustable Latch-Style Coupler Lock, ½” To 3 ½” Adjust. Span, ¼” Dia. Pin |
| HH63223 | Push Block Locking Receiver Pin, 5/8” Dia., Fits 2” & 2 ½” Receivers |
Lynch Pins
PART NUMBER | DESCRIPTION | PIN DIMENSIONS |
|---|---|---|
| LP14 | Zinc Lynch Pin | ¼” DIA. |
025201 | Round Snapper Pin W/Chain | 5/16” X 2 ¼” |
| 38-200 | Square Snapper Pin | 3/8” X 2” |
14-212TR | Round Snapper Pin | ¼” X 2 ½” |
| 14-238 | Square Snapper Pin | ¼” X 2 3/8” |
Deck Screws
PART NUMBER | DESCRIPTION |
|---|---|
| TFX150 | Floor Screw, Torx Drive, ¼” X 1 ½”, Flat Head |
32515 | Floor Screw, Torx Drive, ¼” X 2 ¼”, Flat Head, Self-Threading |
TFX250 | Floor Screw, Torx Drive, ¼” X 2 ½”, Flat Head, Self-Threading* |
*Use 7/32” drill bit to tap hole
Complete Coupler Locks & Single Locks
PART NUMBER | DESCRIPTION | BALL SIZE |
|---|---|---|
| EZTL33-40D | Universal Coupler Lock, Incl. Padlock & Bracket, Fits Most Ball Couplers | 1 7/8”, 2”, 2 5/16” |
EZHB2-40D | Bulldog Coupler Lock, Incl. Padlock & Bracket, Fits Bulldog Ball Couplers | 2”, 2 5/16” |
| EZTL50-40D | EZ Lock Bracket For Gooseneck Ball Couplers | 2 5/16” |
EZTL70-40D | EZ Lock Bracket For Gooseneck Kingpin Couplers, Fits All Kingpin Couplers | N/A |
| EZTL60-40D | EZ Lock Bracket For Pintle Hitches, Incl. Padlock & Bracket, Fits 2 ½” & 3” Pintle Rings | N/A |
40D | Shielded Padlock, 40DPF, Contractor Grade Solid Steel | N/A |
| ST-20 | Universal Coupler Lock, Fits Most Ball Couplers, Incl. Padlock | 1 7/8”, 2”, 2 5/16” |
TFW55 | Universal Kingpin Lock, Heavy Gauge Steel | N/A |
| TRITHPXL | ‘Hockey Puck’ Style Internal Shackle Door Lock For Cam lock Doors | N/A |
TowRax Accessories
PART NUMBER | DESCRIPTION |
|---|---|
| SP180CSA | Junior Oil Cabinet, 18” H X 16” W X 5 ½” D, Fits 2 Rows/6 Quart-Liter Oil Containers, Spray Bottles |
SP280HSA | Double Helmet Rack, 28” Wide Wall Design |
| SP48HR | Tubular Helmet Shelf, 48” Wide, Stainless Steel |
SP2BRA | Double Propane/Racing Fuel Holder |
| SPPTH | Paper Towel Holder |
SP8SHA | Strap Hangers, 8” Wide |
| SPWS | Wheel Chock, Fits Up To 6.5” Wide Tires, Tapered Design W/Keyhole Slots, Stainless Steel Finish, Use Mounting Kit #SPWFKW (Wood), #SPWFKM (Steel) |
| SPWM | Wheel Chock, Fits Up To 6.5” Wide Tires, Tapered Design W/Keyhole Slots, Black Powder-Coat Finish, Use Mounting Kit #SPWFKW (Wood), #SPWFKM (Steel) |
Safety Chains
| PART NUMBER | DESCRIPTION | DIAMETER | LENGTH | CLASS | MIN. BREAK STRENGTH |
|---|---|---|---|---|---|
| RT9016 | Heavy Duty Safety Chains, Incl. Hook | 3/8” | 36” | N/A | 8,500lbs |
Safety Hooks
PART NUMBER | DESCRIPTION | HOOK DIAMETER | CHAIN SIZE | CLASS | BREAK STRENGTH |
|---|---|---|---|---|---|
4480 | ‘S’ Style Safety Hook | 7/16” | ¼” | II & III | 5000lbs |
4581 | ‘S’ Style Safety Hook W/Clasp | 3/8” | 3/16” | I | 2000lbs |